系统仿真学报 ›› 2021, Vol. 33 ›› Issue (10): 2356-2362.doi: 10.16182/j.issn1004731x.joss.20-0499

• 仿真建模理论与方法 • 上一篇    下一篇

复杂系统仿真模型可重用性分析与应用

朱峰1, 姚益平1, 唐文杰1, 李进2   

  1. 1.国防科技大学 系统工程学院,湖南 长沙 410073;
    2.中国人民解放军96901部队,北京 100094
  • 收稿日期:2020-07-17 修回日期:2020-09-08 出版日期:2021-10-18 发布日期:2021-10-18
  • 作者简介:朱峰(1985-),博士,副教授,研究方向为复杂系统建模、并行与分布仿真。E-mail:zhufeng@nudt.edu.cn
  • 基金资助:
    国家自然科学基金(61903368)

Reusability Analysis and Application for Complex System Simulation Model

Zhu Feng1, Yao Yiping1, Tang Wenjie1, Li Jin2   

  1. 1. College of Systems Engineering, National University of Defense Technology, Changsha 410073, China;
    2. Unit 96901 of the Chinese PLA, Beijing 100094, China
  • Received:2020-07-17 Revised:2020-09-08 Online:2021-10-18 Published:2021-10-18

摘要: 模型重用是提高复杂系统仿真应用开发效率的重要途径。当前采用定性/定量方式对仿真模型可重用性及其对复杂系统仿真应用集成开发效率影响的研究相对较少。提出一种仿真模型可重用性分析方法,基于仿真应用集成开发加速比构建了仿真模型可重用性分析数学模型,定性分析了提升模型可重用性对模型接口、模型测试与信息描述的要求。通过2个典型应用案例,定量分析了可重用仿真模型对复杂系统仿真应用开发效率的影响,证明了该方法的有效性。

关键词: 复杂系统仿真, 模型重用, 可重用性分析, 仿真模型接口

Abstract: Model reuse is an important way to improve the development efficiency of complex system simulation application. At present, there are few researches on the reusability of simulation model and its impact on the development efficiency of complex system simulation application integration by using qualitative/quantitative methods. A simulation model reusability analysis method is proposed. By introducing the simulation application integration development speedup ratio, the simulation model reusability analysis mathematical model is constructed, and the requirements of model interface, model testing and information description for improving model reusability are analyzed qualitatively. Through two typical case studies, the influence of reusable simulation model is quantitatively analyzed, and the effectiveness is proved.

Key words: complex system simulation, model reuse, reusability analysis, simulation model interface

中图分类号: